XPression Bridge Settings, Tray, and Startup Behavior

Configure application startup, hidden mode, tray persistence, output autostart, and update checks safely.

Written By 4ALL.LIVE

Last updated About 1 month ago

Configure application startup, hidden mode, tray persistence, output autostart, and update checks safely.

Best for: XPression operators, graphics engineers, caption operators, broadcast engineers, production IT, and licensed desktop administrators.

Before you start

Requires an active 4All organization/event, authorized desktop account, eligible XPression Bridge license, supported app build, and a network path to 4All plus the selected XPression protocol.

  • Document the 4All event/language and XPression scene/DataLinq design.
  • Know the bridge/XPression machines, IP interfaces, protocol, direction, port, firewall owner, and final program return.
  • Prepare a backup output and an off-air test scene.

Step by step

  1. Open Settings. Record current values.
  2. Choose auto-start on login. Enable only on dedicated managed machines.
  3. Choose auto-start hidden. Useful for tray-first operation but requires monitoring discipline.
  4. Choose start-enabled-outputs on launch. Leave off unless automatic transmission is explicitly approved.
  5. Choose keep-running-in-tray. When on, closing the window does not necessarily stop bridges.
  6. Choose update channel/checks. Stable + auto-check is the normal production posture.
  7. Test Close and Quit. Verify which action hides versus terminates outputs.
  8. Test reboot. Confirm expected login/start/output state.
  9. Document operator cues. Tray icon, status page, stop/quit procedure.

What success looks like: The Bridge transports the correct 4All caption state to the intended XPression scene with verified formatting, timing, monitoring, and recovery.

Check your setup

  • Operators can prove whether app/output is running after window close and reboot.
  • No output starts unexpectedly.
  • Update policy matches environment.

Troubleshooting

App seems closed but output continues

It is running in tray; use Status/Outputs and Quit deliberately.

Output did not start

Autostart is intentionally off unless enabled; start from Outputs.

Unexpected nightly build

Set stable channel and install approved release.

Security and operational notes

  • Tray persistence is an operational feature, not a guarantee of monitoring.
  • Quitting can interrupt on-air data.
  • Automatic output start can transmit stale/wrong event data.

Documentation status: Draft based on XPression Bridge repository version 0.1.59. Validate the installed release, supported OS, license policy, and live graphics workflow before publishing.